MS137 Modified polyether bonding

　　MS137 is based on MS resin as the main component of the preparation of a single component sealant,with good sealing performance and cohesion,no corrosion to the adhesive base material,no pollution,no pollution to the environment,glass fiber reinforced plastic,XPS foam board,powder sheet metal parts,metal,wood,plastic and other materials have good bonding performance.

　　First,the main use

　　Suitable for bus,train,heavy truck cab,ship,container,ventilation pipe and other parts of the bonding and sealing.

　　Second,product characteristics

　　1.Environmental protection,no pungent odor;

　　2.High modulus,high strength;

　　3.Table dry fast,fast positioning;

　　4.Good weather resistance,good durability,earthquake resistance

　　Three,use instructions

　　1.The surface of the adhesive base material must be clean and dry,free of dust,oil and water stains.

　　2.The ambient temperature and humidity have great influence on the drying and curing of the sealant surface.It is recommended that the ambient temperature and humidity of the sealant surface be 5-35℃and 50-70%RH.

　　3.The sealing node part can be modified and scraped with a scraper or hard foam strip,and some details can be smoothed with soapy water.

　　4.If the MS137 application will be in contact with the polyurethane adhesive,it must wait for the polyurethane adhesive to be fully cured before MS137 can be used for construction.

　　5.The construction method can refer to the construction instructions or consult our technical personnel.

　　Four,clean up

　　Uncured MS137 can be removed from tools or equipment with a cleaning agent or appropriate solvent.Once cured,it can only be removed mechanically for surface cleaning treatment.

　　Five,safety precautions

　　1.Keep away from children.

　　2.Avoid contact with eyes and skin.If contact with skin carelessly,wipe with cloth first,then wash with soap;In case of contact with eyes,rinse with plenty of water and seek medical attention as soon as possible.

　　Vi.Packaging specifications

　　Aluminum film packaging:600ml/piece,20 pieces/box;200 l/barrel

　　Seven,transport and storage

　　1.Transportation:moisture-proof,rainproof,sunscreen,high temperature,away from heat source,careful handling,no extrusion collision.

　　2.Storage:sealed and stored in a low temperature,dry place,recommended storage temperature 5~25℃,humidity≤50%RH.

　　3.Storage life:9 months

　　Eight,safe operation data

　　Product safety information is not included here.Before use,please read the product information,product safety information and packaging label for safe use.Product safety information can be obtained from SEPNA and its distributors,by email to SEPNA Service center sepna sepna.cc or by calling 400-882-1323.

　　Quality Guarantee-Please read it carefully

　　We guarantee that the performance and usage information contained herein is accurate and reliable.However,you should still test its performance,safe use,and so on before using it.Recommendations applied are not considered to be applicable in all states.Unless SEPNA provides a written proof of suitability for a particular need,SEPNA warrants only the specifications set forth in the product prospectus and not for any other purposes.SEPNA's sole responsibility is to refund or exchange products if they do not meet the requirements listed,and SEPNA expressly disclaims liability for accidents.